diff --git a/po/.intltool-merge-cache.lock b/po/.intltool-merge-cache.lock new file mode 100644 index 0000000..e69de29 diff --git a/po/LINGUAS b/po/LINGUAS index 6b9245d..5a4ed91 100644 --- a/po/LINGUAS +++ b/po/LINGUAS @@ -2,3 +2,4 @@ # de en_GB +zh_CN diff --git a/po/zh_CN.po b/po/zh_CN.po new file mode 100755 index 0000000..105aa56 --- /dev/null +++ b/po/zh_CN.po @@ -0,0 +1,796 @@ +msgid "" +msgstr "" +"Project-Id-Version: gnome-torrent\n" +"Report-Msgid-Bugs-To: \n" +"PO-Revision-Date: 2012-09-23 01:34-0400\n" +"Last-Translator: yanzilisan183 \n" +"Language-Team: Sugar Labs\n" +"Language: zh_CN\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=2; plural=(n != 1);\n" +"X-Generator: Virtaal 0.7.1\n" +"X-Project-Style: gnome\n" + +# nm-wireguard-dialog.ui +msgid "Not Required" +msgstr "不需要" + +msgid "Not required" +msgstr "不需要" + +msgid "OpenVPN Advanced Options" +msgstr "OpenVPN高级选项" + +msgid "Use custom gateway p_ort:" +msgstr "使用自定义网关端口(_O):" + +msgid "" +"TCP/UDP port number for peer. (Default value when there is no port for gateway).\n" +"config: port" +msgstr "" +"对等端的TCP/UDP端口号。（当网关没有端口时的默认值）。\n" +"配置: port" + +msgid "Use custom _renegotiation interval:" +msgstr "使用自定义重新协商间隔(_R):" + +msgid "" +"Renegotiate data channel key after the specified number of seconds.\n" +"config: reneg-sec" +msgstr "" +"在指定的秒数之后重新协商数据通道密钥。\n" +"配置: reneg-sec" + +msgid "Use L_ZO data compression" +msgstr "使用LZO数据压缩(_Z)" + +msgid "" +"Use fast LZO compression.\n" +"config: comp-lzo" +msgstr "" +"使用快速 LZO 压缩。\n" +"配置: comp-lzo" + +msgid "" +"Select the LZO data compression mode.\n" +"config: comp-lzo" +msgstr "" +"选择LZO数据压缩模式。\n" +"配置: comp-lzo" + +msgid "Use a _TCP connection" +msgstr "使用TCP连接(_T)" + +msgid "" +"Use TCP for communicating with remote host.\n" +"(This is a default setting only used when no protocol is specified for the gateway.)\n" +"config: proto tcp-client | udp" +msgstr "" +"使用TCP与远程主机通信。\n" +"(这是在没有为网关指定协议时使用的默认设置)。\n" +"配置: proto tcp-client | udp" + +msgid "Set virtual _device type:" +msgstr "设置虚拟设备类型(_D):" + +msgid "Explicitly set virtual device type and name (TUN/TAP)." +msgstr "显式设置虚拟设备类型和名称(TUN/TAP)。" + +msgid "" +"Explicitly set virtual device type (TUN/TAP).\n" +"config: dev-type tun | tap" +msgstr "" +"显式设置虚拟设备类型(TUN/TAP)。" +"配置: dev-type tun | tap" + +msgid " and _name:" +msgstr "和名称(_N):" + +msgid "" +"Use custom name for TUN/TAP virtual device (instead of default “tun” or “tap”).\n" +"config: dev " +msgstr "" +"使用TUN/TAP虚拟设备的自定义名称(而不是默认的“TUN”或“TAP”)。\n" +"配置: dev <名称>" + +msgid "Use custom tunnel Maximum Transmission _Unit (MTU):" +msgstr "使用自定义隧道最大传输单元(MTU)(_U):" + +msgid "" +"Take the TUN device MTU to be the specified value and derive the link MTU from it.\n" +"config: tun-mtu" +msgstr "" +"以TUN设备MTU为指定值，从中导出链接MTU。\n" +"配置: tun-mtu" + +msgid "Use custom UDP _fragment size:" +msgstr "使用自定义UDP片段大小(_F):" + +msgid "" +"Enable internal datagram fragmentation with this maximum size.\n" +"config: fragment" +msgstr "" +"启用此最大大小的内部数据报碎片。\n" +"配置: fragment" + +msgid "Restrict tunnel TCP Maximum _Segment Size (MSS)" +msgstr "限制隧道TCP最大段大小(MSS)(_S)" + +msgid "" +"Restrict tunnel TCP MSS.\n" +"config: mssfix" +msgstr "" +"限制隧道TCP MSS。\n" +"配置: mssfix" + +msgid "Rando_mize remote hosts" +msgstr "随机化远程主机(_M)" + +msgid "" +"Randomize the order of gateways list (remote) as a kind of basic load-balancing measure.\n" +"config: remote-random" +msgstr "" +"将网关列表（远程）的顺序作为一种基本的负载平衡措施随机化。\n" +"配置: remote-random" + +msgid "IPv6 tun link" +msgstr "IPv6 tun链路" + +msgid "" +"Build a tun link capable of forwarding IPv6 traffic\n" +"config: tun-ipv6" +msgstr "" +"构建能够转发IPv6业务的TUN链路。\n" +"配置: tun-ipv6" + +msgid "Specify _exit or restart ping:" +msgstr "指定退出或重新启动ping(_E):" + +msgid "" +"Exit or restart after n seconds pass without reception of a ping or other packet from remote.\n" +"config: ping-exit | ping-restart " +msgstr "" +"在没有接收来自远程的ping或其他分组之后，在N秒之后退出或重启。\n" +"配置: ping-exit | ping-restart " + +msgid "Specify pin_g interval:" +msgstr "指定ping间隔(_G):" + +msgid "" +"Ping remote over the TCP/UDP control channel if no packets have been sent for at least n seconds.\n" +"config: ping " +msgstr "" +"如果没有发送至少N秒的数据包，ping就在TCP/UDP控制信道上进行远程操作。\n" +"配置: ping " + +msgid "Accept authenticated packets from any address (F_loat)" +msgstr "接受来自任何地址的认证包(浮点)(_L)" + +msgid "" +"Allow remote peer to change its IP address and/or port number, such as due to DHCP " +"(this is the default if --remote is not used). --float when specified with --remote " +"allows an OpenVPN session to initially connect to a peer at a known address, however " +"if packets arrive from a new address and pass all authentication tests, the new address " +"will take control of the session. This is useful when you are connecting to a peer which " +"holds a dynamic address such as a dial-in user or DHCP client.\n" +"\n" +"Essentially, --float tells OpenVPN to accept authenticated packets from any address, " +"not only the address which was specified in the --remote option.\n" +"\n" +"config: float" +msgstr "" +"允许远程对等更改其IP地址和/或端口号，例如由于DHCP(如果未使用--remote，则这是默认设置)。" +"--float当使用--remote指定时，允许OpenVPN会话最初连接到位于已知地址的对等方，但是如果数据包" +"从新地址到达并通过所有身份验证测试，则新地址将控制会话。当您连接到拥有动态地址（如拨入用户或" +"DHCP客户机）的对等机时，这很有用。\n" +"实际上，--float告诉OpenVPN从任何地址接受经过身份验证的数据包，而不仅仅是--remote选项中指定的地址。\n" +"配置: float" + +msgid "Specify max routes:" +msgstr "指定最大路由:" + +msgid "" +"Specify the maximum number of routes the server is allowed to specify.\n" +"config: max-routes " +msgstr "" +"指定服务器允许指定的最大路由数。\n" +"配置: max-routes " + +msgid "General" +msgstr "通用" + +msgid "" +"Encrypt packets with cipher algorithm. The default is BF-CBC (Blowfish in Cipher Block Chaining mode).\n" +"config: cipher" +msgstr "" +"用密码算法对数据包进行加密。默认值是BF-CBC(密码块链接模式下的Blowfish)。\n" +"配置: cipher" + +msgid "Use custom _size of cipher key:" +msgstr "使用自定义密码密钥大小(_S):" + +msgid "" +"Set cipher key size to a custom value. If unspecified, it defaults to cipher-specific size.\n" +"config: keysize " +msgstr "" +"将密码密钥大小设置为自定义值。如果未指定，则默认为密码特定大小。\n" +"配置: keysize " + +msgid "" +"Authenticate packets with HMAC using message digest algorithm. The default " +"is SHA1.\n" +"config: auth" +msgstr "" +"使用消息摘要算法对HMAC进行分组认证。默认值为SHA1。\n" +"配置: auth" + +msgid "Ci_pher:" +msgstr "密码(_P):" + +msgid "_HMAC Authentication:" +msgstr "HMAC身份验证(_H):" + +msgid "Security" +msgstr "安全" + +msgid "_Subject Match:" +msgstr "主题匹配(_S):" + +msgid "" +"Subject or Common Name to verify server certificate information against.\n" +"\n" +"config: verify-x509-name subject-or-name [mode]\n" +"config (legacy mode): tls-remote subject-or-name" +msgstr "" +"验证服务器证书信息的使用者或公用名。\n" +"配置: verify-x509-name subject-or-name [mode]\n" +"配置(传统模式): tls-remote subject-or-name" + +msgid "Server _Certificate Check:" +msgstr "服务器证书检查(_C):" + +msgid "" +"Verify server certificate identification.\n" +"\n" +"When enabled, connection will only succeed if the server certificate matches some expected properties.\n" +"Matching can either apply to the whole certificate subject (all the fields),\n" +"or just the Common Name (CN field).\n" +"\n" +"The legacy option tls-remote is deprecated and removed from OpenVPN 2.4 and newer. Do not use it anymore.\n" +"\n" +"config: verify-x509-name subject-or-name [mode]\n" +"config (legacy mode): tls-remote subject-or-name" +msgstr "" +"验证服务器证书标识。\n" +"启用时，只有服务器证书与某些预期属性匹配时，连接才会成功。\n" +"匹配可以应用于整个证书主题(所有字段)，或者只是通用名(CN字段)。\n" +"旧版选项tls-remote已弃用，并已从OpenVPN 2.4及更高版本中删除。勿再使用。\n" +"配置: verify-x509-name subject-or-name [mode]\n" +"配置(传统模式): tls-remote subject-or-name" + +msgid "_Verify peer (server) certificate usage signature" +msgstr "验证对端(服务器)证书使用签名(_V)" + +msgid "Require that peer certificate was signed with an explicit key usage and extended key usage based on RFC3280 TLS rules." +msgstr "要求对端证书使用显式密钥用法和基于RFC3280 TLS规则的扩展密钥用法进行签名。" + +msgid "_Remote peer certificate TLS type:" +msgstr "远程对端证书TLS类型(_R):" + +msgid "" +"Require that peer certificate was signed with an explicit key usage and extended key usage based on RFC3280 TLS rules.\n" +"config: remote-cert-tls client|server" +msgstr "" +"要求对端证书使用显式密钥用法和基于RFC3280 TLS规则的扩展密钥用法进行签名。\n" +"配置: remote-cert-tls client|server" + +msgid "_Verify peer (server) certificate nsCertType designation" +msgstr "验证对端(服务器)证书nsCertType指定(_V):" + +msgid "Require that peer certificate was signed with an explicit nsCertType designation." +msgstr "要求对端证书使用显式nsCertType指定签名。" + +msgid "_Remote peer certificate nsCert designation:" +msgstr "远程对端证书nsCert指定(_R):" + +msgid "" +"Require that peer certificate was signed with an explicit nsCertType designation.\n" +"config: ns-cert-type client|server" +msgstr "" +"要求对端证书使用显式nsCertType指定签名。\n" +"配置: ns-cert-type client|server" + +msgid "Key _Direction:" +msgstr "Key方向(_D):" + +msgid "" +"Add an additional layer of HMAC authentication on top of the TLS control channel to protect against DoS attacks.\n" +"config: tls-auth [direction]" +msgstr "" +"在TLS控制通道的顶部添加额外的HMAC身份验证层，以防止DoS攻击。\n" +"配置: tls-auth <文件> [方向]" + +msgid "" +"Direction parameter for static key mode.\n" +"If key direction is used, it must be the opposite of that used on the VPN " +"peer. For example, if the peer uses '1', this connection must use '0'. If " +"you are unsure what value to use, contact your system administrator.\n" +"config: tls-auth [direction]" +msgstr "" +"静态键模式的方向参数。\n" +"如果使用密钥方向，则必须与VPN对等体上使用的方向相反。例如，如果对等体使用“1”，" +"则该连接必须使用“0”。如果不确定使用什么值，请与系统管理员联系。\n" +"配置: tls-auth <文件> [direction]" + +msgid "Key _File:" +msgstr "Key文件(_F):" + +msgid "Mode" +msgstr "模式" + +msgid "Add an additional layer of encryption or HMAC authentication." +msgstr "添加一个附加的加密层或HMAC认证。" + +msgid "Additional TLS authentication or encryption" +msgstr "附加TLS身份验证或加密" + +msgid "TLS Authentication" +msgstr "TLS身份验证" + +msgid "" +"Proxy type: HTTP or Socks.\n" +"config: http-proxy or socks-proxy" +msgstr "" +"代理类型: HTTP 或 Socks.\n" +"配置: http-proxy or socks-proxy" + +msgid "Proxy _Type:" +msgstr "代理类型(_T):" + +msgid "" +"Select this option if your organization requires the use of a proxy server to access the Internet." +msgstr "" +"如果您的组织需要使用代理服务器访问Internet，请选择此选项。" + +msgid "Server _Address:" +msgstr "服务器地址(_A):" + +msgid "" +"Connect to remote host through a proxy with this address.\n" +"config: http-proxy or socks-proxy" +msgstr "" +"通过一个带有这个地址的代理连接到远程主机。\n" +"配置: http-proxy or socks-proxy" + +msgid "" +"Connect to remote host through a proxy with this port.\n" +"config: http-proxy or socks-proxy" +msgstr "" +"通过该端口与代理连接到远程主机。\n" +"配置: http-proxy or socks-proxy" + +msgid "_Retry indefinitely when errors occur" +msgstr "当错误发生时无限期重试(_R)" + +msgid "" +"Retry indefinitely on proxy errors. It simulates a SIGUSR1 reset.\n" +"config: http-proxy-retry or socks-proxy-retry" +msgstr "" +"对代理错误无限期重试。它模拟SIGUSR1复位。\n" +"配置: http-proxy-retry or socks-proxy-retry" + +msgid "Proxy _Username:" +msgstr "代理用户名(_U):" + +msgid "Proxy Passwor_d:" +msgstr "代理密码(_D):" + +msgid "HTTP/Socks proxy username passed to OpenVPN when prompted for it." +msgstr "当提示时，HTTP/SOCKS代理用户名传递给OpenVPN。" + +msgid "HTTP/Socks proxy password passed to OpenVPN when prompted for it." +msgstr "当提示时，HTTP/SOCKS代理密码传递给OpenVPN。" + +msgid "_Show password" +msgstr "显示密码(_S)" + +msgid "Proxies" +msgstr "代理" + +msgid "Path mtu discovery" +msgstr "路径MTU发现" + +msgid "Misc" +msgstr "其他" + +msgid "Interface" +msgstr "接口" + +msgid "Address (IPv4):" +msgstr "IPv4地址:" + +msgid "Address (IPv6):" +msgstr "IPv6地址:" + +msgid "Listen Port:" +msgstr "监听端口:" + +msgid "Private Key:" +msgstr "私钥:" + +msgid "DNS:" +msgstr "DNS:" + +msgid "MTU:" +msgstr "MTU:" + +msgid "Pre Up:" +msgstr "Pre Up:" + +msgid "Post Up:" +msgstr "Post Up:" + +msgid "Pre Down:" +msgstr "Pre Down:" + +msgid "Post Down:" +msgstr "Post Down:" + +msgid "Peer" +msgstr "对端" + +msgid "Public Key:" +msgstr "公钥:" + +msgid "Allowed IPs:" +msgstr "允许的IP:" + +msgid "Endpoint:" +msgstr "对端地址:" + +msgid "Preshared Key:" +msgstr "预共享密钥:" + +msgid "Persis. Keepalive:" +msgstr "保持连接:" + +# 原文 +msgid " " +msgstr " " + +msgid "Authentication" +msgstr "身份验证" + +msgid "General" +msgstr "通用" + +msgid "" +"Connect only to servers whose certificate matches the given subject.\n" +"Example: /CN=myvpn.company.com" +msgstr "" +"只连接证书与给定主题匹配的服务器。\n" +"示列: /CN=myvpn.company.com" + +msgid "" +"Accept connections only from a host with X509 name or common name equal to " +"the specified one.\n" +"config: tls-remote" +msgstr "" +"只接受具有X509名称或公共名称的主机的连接，与指定的连接相同。\n" +"配置: tls-remote" + +msgid "Ad_vanced..." +msgstr "高级(_V)..." + +msgid "Add an additional layer of HMAC authentication." +msgstr "添加一个附加的HMAC认证层。" + +msgid "Add, Remove, and Edit VPN Connections" +msgstr "添加、删除和编辑VPN连接" + +msgid "Always Ask" +msgstr "总是询问" + +msgid "Authenticate VPN" +msgstr "验证VPN" + +msgid "CA Certificate:" +msgstr "CA证书:" + +msgid "" +"Certificate authority (CA) file in .pem format.\n" +"config: ca" +msgstr "" +"证书颁发机构(CA)的.pem文件。\n" +"配置: ca" + +msgid "Certificate pass_word:" +msgstr "证书密码(_W):" + +msgid "Certificate password:" +msgstr "证书密码:" + +msgid "Certificates (TLS)" +msgstr "证书(TLS)" + +msgid "Choose a Certificate Authority certificate..." +msgstr "选择证书颁发机构证书…" + +msgid "Choose an OpenVPN static key..." +msgstr "选择OpenVPN静态密钥…" + +msgid "Choose your personal certificate..." +msgstr "选择您的个人证书…" + +msgid "Choose your private key..." +msgstr "选择您的私钥…" + +msgid "Compatible with the OpenVPN server." +msgstr "与OpenVPN服务器兼容。" + +msgid "Could not find the openvpn binary." +msgstr "找不到OpenVPN二进制。" + +msgid "" +"Could not process the request because the VPN connection settings were " +"invalid." +msgstr "" +"无法处理请求，因为VPN连接设置无效。" + +msgid "Default" +msgstr "默认" + +msgid "" +"Direction for Static Key encryption mode (non-TLS).\n" +"If key direction is used, it must be the opposite of that used on the VPN " +"peer. For example, if the peer uses '1', this connection must use '0'. If " +"you are unsure what value to use, contact your system administrator.\n" +"config: static [direction]" +msgstr "" +"静态密钥加密模式(非TLS)的方向。\n" +"如果使用密钥方向，则必须与VPN对等体上使用的方向相反。例如，如果对等体使用“1”，" +"则该连接必须使用“0”。如果不确定使用什么值，请与系统管理员联系。\n" +"配置: static <文件> [方向]" + +msgid "Don't quit when VPN connection terminates" +msgstr "VPN连接终止时不要退出" + +msgid "Enable verbose debug logging (may expose passwords)" +msgstr "启用详细调试日志记录(可能会暴露密码)" + +msgid "HTTP" +msgstr "HTTP" + +msgid "" +"IP address of the local VPN endpoint.\n" +"config: ifconfig " +msgstr "" +"本地VPN端点的IP地址。\n" +"配置: ifconfig " + +msgid "" +"IP address of the remote VPN endpoint.\n" +"config: ifconfig " +msgstr "" +"远程VPN端点的IP地址。\n" +"配置: ifconfig " + +msgid "Invalid HMAC auth." +msgstr "HMAC身份验证无效。" + +msgid "Invalid TUN MTU size '%s'." +msgstr "TUN MTU大小“%s”无效。" + +msgid "Invalid connection type." +msgstr "连接类型无效。" + +msgid "Invalid fragment size '%s'." +msgstr "碎片大小“%s”无效。" + +msgid "Invalid port number '%s'." +msgstr "端口号“%s”无效。" + +msgid "Invalid proxy type '%s'." +msgstr "代理类型“%s”无效。" + +msgid "Invalid reneg seconds '%s'." +msgstr "重协商秒数“%s”无效。" + +msgid "Key Direction:" +msgstr "Key方向:" + +msgid "Local IP Address:" +msgstr "本地IP地址:" + +msgid "" +"Local peer's private key in .pem format.\n" +"config: key" +msgstr "" +"本地对等方的.pem格式私钥。\n" +"配置: key" + +msgid "" +"Local peer's signed certificate in .pem format (signed by CA of CA " +"Certificate).\n" +"config: cert" +msgstr "" +"本地对等方的.pem格式签名证书(由证书颁发机构的CA证书签名)。\n" +"配置: cert" + +msgid "MD-5" +msgstr "MD-5" + +msgid "Missing required local IP address for static key mode." +msgstr "缺少静态密钥模式所需的本地IP地址。" + +msgid "Missing required remote IP address for static key mode." +msgstr "缺少静态密钥模式所需的远程IP地址。" + +msgid "No VPN configuration options." +msgstr "没有VPN配置选项。" + +msgid "None" +msgstr "None" + +msgid "OpenVPN" +msgstr "OpenVPN" + +msgid "OpenVPN Static Keys (*.key)" +msgstr "OpenVPN静态密钥(*.key)" + +msgid "PEM certificates (*.pem, *.crt, *.key, *.cer)" +msgstr "PEM证书(*.pem, *.crt, *.key, *.cer)" + +msgid "PEM or PKCS#12 certificates (*.pem, *.crt, *.key, *.cer, *.p12)" +msgstr "PEM或PKCS#12证书(*.pem, *.crt, *.key, *.cer, *.p12)" + +msgid "Password" +msgstr "密码" + +msgid "Password for private key" +msgstr "私钥密码" + +msgid "" +"Password passed to OpenVPN when prompted for it.\n" +"config: auth-user-pass" +msgstr "" +"提示输入时传递给OpenVPN的密码。\n" +"配置: auth-user-pass" + +msgid "Password with Certificates (TLS)" +msgstr "带密码的证书(TLS)" + +msgid "Password:" +msgstr "密码:" + +msgid "" +"Pre-shared file for Static Key encryption mode (non-TLS).\n" +"config: static " +msgstr "" +"用于静态密钥加密模式(非TLS)的预共享文件。\n" +"配置: static <文件>" + +msgid "Private Key Password:" +msgstr "私钥密码:" + +msgid "RIPEMD-160" +msgstr "RIPEMD-160" + +msgid "RSA MD-4" +msgstr "RSA MD-4" + +msgid "Remote IP Address:" +msgstr "远程IP地址:" + +msgid "SHA-1" +msgstr "SHA-1" + +msgid "SHA-224" +msgstr "SHA-224" + +msgid "SHA-256" +msgstr "SHA-256" + +msgid "SHA-384" +msgstr "SHA-384" + +msgid "SHA-512" +msgstr "SHA-512" + +msgid "SOCKS" +msgstr "SOCKS" + +msgid "Saved" +msgstr "保存的" + +msgid "Select an authentication mode." +msgstr "选择身份验证模式。" + +msgid "Static Key" +msgstr "静态密钥" + +msgid "Static Key:" +msgstr "静态密钥:" + +msgid "TAP" +msgstr "TAP" + +msgid "" +"TCP/UDP port number for local peer.\n" +"config: port" +msgstr "" +"本地对等端的TCP/UDP端口号。\n" +"配置: port" + +msgid "TUN" +msgstr "TUN" + +msgid "Type:" +msgstr "类型:" + +msgid "Unknown connection type '%s'." +msgstr "连接类型“%s”未知。" + +msgid "" +"Use TCP for communicating with remote host.\n" +"config: proto tcp-client | udp" +msgstr "" +"使用TCP与远程主机通信。\n" +"配置: proto tcp-client | udp" + +msgid "Use additional _TLS authentication" +msgstr "使用附加的TLS认证(_T)" + +msgid "User Certificate:" +msgstr "用户证书 :" + +msgid "User name:" +msgstr "用户名:" + +msgid "" +"Username passed to OpenVPN when prompted for it.\n" +"config: auth-user-pass" +msgstr "" +"当提示时，传递给OpenVPN的用户名。\n" +"配置: auth-user-pass" + +msgid "VPN Connection Manager (OpenVPN)" +msgstr "VPN连接管理器(OpenVPN)" + +msgid "You need to authenticate to access the Virtual Private Network '%s'." +msgstr "要访问虚拟专用网络“%s”，需要进行身份验证。" + +msgid "_Gateway:" +msgstr "网关(_G):" + +msgid "_Port:" +msgstr "端口(_P):" + +msgid "_Show passwords" +msgstr "显示密码(_S)" + +msgid "invalid address '%s'" +msgstr "地址“%s”无效。" + +msgid "invalid boolean property '%s' (not yes or no)" +msgstr "布尔属性“%s”无效。(不是 yes 或 no)" + +msgid "invalid integer property '%s' or out of range [%d -> %d]" +msgstr "整型属性“%s”无效或超出范围[%d到%d]" + +msgid "" +"nm-openvpn-service provides integrated OpenVPN capability to NetworkManager." +msgstr "" +"nm-openvpn-servicenm为NetworkManager提供了完整的OpenVPN能力。" + +msgid "property '%s' invalid or not supported" +msgstr "属性“%s”无效或不支持" + +msgid "unhandled property '%s' type %s" +msgstr "未处理的属性“%s”类型%s" + +msgid "Used to set up client-side Wireguard connections." +msgstr "用于设置客户端 Wireguard 连接" + diff --git a/src/nm-wireguard-service.c b/src/nm-wireguard-service.c index 1195b37..7e1c0ae 100644 --- a/src/nm-wireguard-service.c +++ b/src/nm-wireguard-service.c @@ -45,7 +45,7 @@ #include #include #include - +#include #include "utils.h" #include "import-export.h" #include "nm-utils/nm-shared-utils.h" @@ -104,7 +104,7 @@ typedef struct { GString *connection_config; } NMWireguardPluginPrivate; -G_DEFINE_TYPE (NMWireguardPlugin, nm_wireguard_plugin, NM_TYPE_VPN_SERVICE_PLUGIN) +G_DEFINE_TYPE (NMWireguardPlugin, nm_wireguard_plugin, NM_TYPE_VPN_SERVICE_PLUGIN); #define NM_WIREGUARD_PLUGIN_GET_PRIVATE(o) (G_TYPE_INSTANCE_GET_PRIVATE ((o), NM_TYPE_WIREGUARD_PLUGIN, NMWireguardPluginPrivate)) @@ -392,13 +392,57 @@ set_config(NMVpnServicePlugin *plugin, NMConnection *connection) if(setting){ // TODO val = g_variant_new_string(setting); - g_variant_builder_add(&dns_builder, "{ss}", NMV_WG_TAG_DNS, val); + g_variant_builder_add(&dns_builder, "{sv}", NMV_WG_TAG_DNS, val); has_dns = TRUE; } setting = get_setting(s_vpn, NM_WG_KEY_ENDPOINT); if(setting){ - // TODO + char *p; + int q = 0; + int l = strlen(setting); + for(int i=0; i1){ + // Look like IPv6 + val = ip6_to_gvariant(setting); + if(val){ + g_variant_builder_add(&builder, "{sv}", NM_VPN_PLUGIN_CONFIG_EXT_GATEWAY, val); + } + }else{ + // IPv4 or domain name. + p = strstr(setting, ":"); + if(p){ + // Delete :port. + p[0]='\0'; + } + val = ip4_to_gvariant(setting); + if(val){ + // Is IP address. + // NM_VPN_PLUGIN_IP4_CONFIG_GATEWAY == NM_VPN_PLUGIN_IP4_CONFIG_EXT_GATEWAY == NM_VPN_PLUGIN_CONFIG_EXT_GATEWAY + g_variant_builder_add(&builder, "{sv}", NM_VPN_PLUGIN_CONFIG_EXT_GATEWAY, val); + }else{ + // Is hostname or domain name. + struct hostent *host; + char buff[17]; + if ((host = gethostbyname2(setting, AF_INET)) != NULL){ + inet_ntop(AF_INET, (struct in_addr *)host->h_addr_list[0], buff, sizeof(buff)); + val = ip4_to_gvariant(buff); + if(val){ + g_variant_builder_add(&builder, "{sv}", NM_VPN_PLUGIN_CONFIG_EXT_GATEWAY, val); + } + }else if((host = gethostbyname2(setting, AF_INET6)) != NULL){ + inet_ntop(AF_INET6, (struct in_addr *)host->h_addr_list[0], buff, sizeof(buff)); + val = ip6_to_gvariant(buff); + if(val){ + g_variant_builder_add(&builder, "{sv}", NM_VPN_PLUGIN_CONFIG_EXT_GATEWAY, val); + } + } + } + } } setting = get_setting(s_vpn, NM_WG_KEY_MTU);